Maintenance of Fanuc high-speed spot welding robot R-1000iA/100F
The maintenance this time is for the Fanuc high-speed spot welding robot R-1000iA/100F for the right rear longitudinal beam assembly and the rear floor sub assembly.
Daily maintenance content of Fanuc robotic arm R-1000iA/100F:
1. Is the noise and vibration of R-1000iA/100F normal, and is the motor temperature normal.
2. Can the surrounding facilities of R-1000iA/100F work properly.
3. Is the holding brake of R-1000iA/100F five axes normal.
Fanuc Robot R-1000iA/100F Three month Maintenance Content:
1. Check and clean the cables in the control section;
2. Check and clean the ventilation of the controller;
3. Check and clean the cables of the body;
4. Whether the fixing condition of the connectors is good;
5. Tighten the cover plate and various accessories on the machine;
6. Remove dust and debris from the machine;
Six month maintenance content for Fanuc robotic arm R-1000iA/100F:
Replace the lubricating oil of the balance block bearing, and refer to the maintenance content of the three-month cycle for others.
Fanuc Robot R-1000iA/100F Annual Maintenance Content:
Replace the battery on the robot body, and refer to the six-month maintenance schedule for other details.
Fanuc robotic arm R-1000iA/100F three-year maintenance content:
Replace the lubricating oil of the robot reducer, and refer to the one-year maintenance schedule for other details.